[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- To: Multiple recipients of list BOOK_ARTS-L <BOOK_ARTS-L@LISTSERV.SYR.EDU>
- Subject: Re: Degreasing
- From: Mary Bookwalter <gmbookwa@UXA.ECN.BGU.EDU>
- Date: Tue, 12 Nov 1996 10:10:35 -0600
- In-Reply-To: <199611120407.WAA05174@uxa.ecn.bgu.edu>
- Message-Id: <199611121612.IAA15274@SUL-Server-2.Stanford.EDU>
- Sender: "The Book Arts: binding, typography, collecting" <BOOK_ARTS-L@LISTSERV.SYR.EDU>
I like the sound of what your'e doing, printing on aluminum pop cans is
neat. As to degreasing, what kind of ink are you using? I would assume
it is oil based, if so, degreasing before inking isn't always necessary as
you're applying an oil based ink. If you are using a water based ink, of
course you need to. Generally degreasing is needed before applying
a ground or aquatint.
French Chalk is talc, still handled by printmaking
outlets, however it can be dangerous, handle with a mask. You can get it
through Graphic Chemical & Ink Co., P.O. Box 27, Villa Park, IL 60181 or
probably Daniel Smith, 4150 First Ave. South, Seattle, WA 98124-5568.
I also use Whiting, (calcium carbonate), mixed with Ammonia and water for
degreasing copper and zinc. Also, a very light etch, 30 seconds in a 16
to 1 nitric bath will clean a plate, as might a citric acid or vinegar
I'd like to hear more about what you're doing as I do as lot of
experimenting with printing methods too.