[Table of Contents] [Search]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Standing Press



>>Date:    Fri, 6 Aug 1999 08:02:40 -0700
From:    Betty Storz <storz@MCN.ORG>
Subject: Re: Standing Press

I would have a problem with built-in poly edged boards, unless there are
interchangeable boards with varied diameter rods. ...
How long are the built-in poly edged boards on your press? Or do you have
interchangeable boards with ?<<<

   The poly edges on the boards are 12 1/2" long with a rounded 1/8" thick =
edge.  The boards fit into slides on the top and bottom platens.  They can =
be removed turned over and re-inserted as plain boards with no raised =
edge.  In this configuration you could use any of your varied rods in =
those cases where the standard poly edges were not sufficient.

      =20


Pete Jermann
Preservation Officer/Bookbinder
Friedsam Memorial Library
St. Bonaventure University
St. Bonaventure, NY 14778


[Subject index] [Index for current month] [Table of Contents] [Search]