[Table of Contents] [Search]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BKARTS] 20# bond grain direction



On Feb 22, 2005, at 2:28 PM, Octavia & Co. Press wrote:

What suggestions do you have for printing on 20# bond paper. Usually,
we
cut the page in half, which causes the grain to be in the wrong
direction for PVA binding (warps and wrinkles). I hesistate to use
11x17, as it would require a potentially inaccurate cut, and I don't
want to waste the paper by printing only one page per side. Is there a
way to buy paper with the grain running on the short edge? If so,
where?


******************************
If you cannot purchase a particular paper in a cut size with the
correct grain direction, you will have to purchase a larger size (i.e.
25" x 38", etc.) and cut it down. Unfortunately, it can mean a certain
amount of waste, BUT that is what one has to do in order to fulfill the
standards that you establish for your work  --- the customer will just
have to pay for the added charges.

For us here in the states, the GLODAN PAPER, INC (800-770-7913 USA
calls, or outside the USA: 717-737-7913)  will supply any (small)
quantity of paper in full sheet size and other cut sizes. They also
have a website at        www.glodan.com .

Bill Minter

William Minter Bookbinding & Conservation, Inc.
4364 Woodbury Pike
Woodbury, PA  16695
814-793-4020
Fax:   814-793-4045
Email:    wminter@xxxxxxxxxxxxxx

            ***********************************************
    The Bonefolder: an e-journal for the bookbinder and book artist

            For all your subscription questions, go to the
                     Book_Arts-L FAQ and Archive.

                 Both at: <http://www.philobiblon.com>
            ***********************************************


[Subject index] [Index for current month] [Table of Contents] [Search]